Schneider Electric LRD08 Dimensions & Terminal Map
Schneider Electric LRD08 is available as an editable manufacturer starter profile for 2D panel and 3D panel. It links a 45 × 66 × 70 mm panel envelope reference envelope to 10 typed terminals and 5 schematic units; verify every value against the current official product documentation.
- Library ID
- schneider-electric-lrd08
- Manufacturer
- Schneider Electric
- Catalog number
- LRD08
- Product family
- TeSys Deca LRD
- Profile status
- Editable starter profile; verify official data
- Typed terminals
- 10
- Automation readiness
- auto wire ready
- Category
- Protection
- Editor symbol
- thermal-overload
- Available in
- 2D panel, 3D panel
- Panel envelope
- 45 × 66 × 70 mm
- Mounting
- Din rail
- 3D asset family
- Contactor
Official manufacturer source
Check the current manufacturer documentation. Source link checked 2026-10-22.
Schematic symbol reference
See the Thermal Overload Relay symbol meaning, terminals, standards, and example diagrams. The symbol describes electrical function; this component profile describes the physical realization.
Physical terminals mapped to design intent
This auto wire ready profile describes typed terminal roles and symbol-pin mappings. It still requires an explicit user-selected wiring recipe.
| Terminal | Label | Role | Domain | Direction |
|---|---|---|---|---|
| 1L1 | 1/L1 line (from contactor T1) | line | power | input |
| 3L2 | 3/L2 line (from contactor T2) | line | power | input |
| 5L3 | 5/L3 line (from contactor T3) | line | power | input |
| 2T1 | 2/T1 motor load | load | power | output |
| 4T2 | 4/T2 motor load | load | power | output |
| 6T3 | 6/T3 motor load | load | power | output |
| 95 | 95 trip contact common (NC) | trip common | control | bidirectional |
| 96 | 96 trip contact NC | trip nc | control | bidirectional |
| 97 | 97 alarm contact common (NO) | alarm common | control | bidirectional |
| 98 | 98 alarm contact NO | alarm no | control | bidirectional |
What this component entry includes
TeSys Deca LRD thermal overload relay starter profile, current setting range 2.5–4 A, for direct mounting under TeSys Deca LC1D09–LC1D38 contactors. Main poles 1/L1-3/L2-5/L3 to 2/T1-4/T2-6/T3; auxiliary 95-96 NC trip contact and 97-98 NO alarm contact. Starter profile — verify setting range, trip class and dimensions against the current datasheet. The Schneider Electric LRD08 starter profile combines the “thermal-overload” symbol family with editable panel geometry, typed terminal semantics, and 5 schematic-unit mappings. It is designed to accelerate part selection and validation without presenting community-maintained data as manufacturer-certified.
- Library ID: schneider-electric-lrd08
- Manufacturer: Schneider Electric
- Catalog number: LRD08
- Product family: TeSys Deca LRD
- Profile status: Editable starter profile; verify official data
- Typed terminals: 10
How it behaves in the editor
Add the part from the physical component library, then position it in 2D panel. The editor stores the physical part ID with the placed device so the schematic record, selected footprint, panel position, and reports remain connected instead of becoming unrelated drawings.
- Dimensioned footprint in the 2D enclosure view
- Shape-specific 3D geometry instead of an anonymous box
- Mounting classification: din rail
- Collision and enclosure-boundary checks
- GLB visualization export in metre units
Verify and version this manufacturer profile
Open the official source below, compare the exact suffix and current revision, then correct the envelope, ratings, terminal map, and mounting details where required. When placed, the editor stores a versioned snapshot so future library changes cannot silently alter an issued project.
- Check the latest manufacturer dimensional drawing
- Verify terminal or pad numbering against the schematic
- Confirm installation clearance and heat-dissipation requirements
- Record the exact catalog number and datasheet URL in the project
Use this component in five steps
- Open 2D panel and search for “Schneider Electric LRD08” in the Components panel.
- Place the part, then select it to review its engineering and physical properties.
- Open the official manufacturer source and verify the full catalog suffix, current status, dimensions, ratings, and terminal designations.
- Position it on the backplate, DIN rail, or door; then check overlap and enclosure boundaries in 2D and 3D.
- Save or release the project so the selected physical data stays with the issued design.
Engineering boundaries
- This is an independent, editable starter profile—not a manufacturer-certified CAD model and not an affiliation or endorsement. Check the linked official source and confirm the exact ordered product, revision, terminal numbering, ratings, dimensions, tolerances, clearances, and cutout before fabrication.
- The 3D asset is parametric visualization geometry and GLB handoff, not an imported STEP/Parasolid manufacturer model.
- Electrical ratings shown in project fields are documentation inputs; they are not automatically certified against regional codes or the component datasheet.
Frequently asked questions
Is the Schneider Electric LRD08 available in the online editor?
Yes. Search for it in the Components panel while using 2D panel and 3D panel. The placed component keeps the library ID with its engineering record.
What dimensions does this Schneider Electric LRD08 entry use?
The editable catalog profile uses 45 × 66 × 70 mm panel envelope. These are starting dimensions and should be checked against the exact ordered part and its current manufacturer drawing.
Can I change the dimensions or terminal map?
Yes. Use the custom part builder to copy a compatible archetype, then define manufacturer, catalog number, width, height, depth, mounting, physical terminals, semantic roles, and symbol-pin mappings. Placed devices retain an immutable revision snapshot.
Is this a manufacturer-certified model?
This is an independent, editable starter profile—not a manufacturer-certified CAD model and not an affiliation or endorsement. Check the linked official source and confirm the exact ordered product, revision, terminal numbering, ratings, dimensions, tolerances, clearances, and cutout before fabrication.